Ultrasonic Flow Meter For Air TRX50D-C/5P Aichi Tokei Denki Vietnam
| 100% Japan Origin | Aichi Tokei Denki Vietnam | TRX50D-C/5P (with 5m cable) Flow Meter Ultrasonic Flow Meter For Air *Gas type: factory air, externally-powered spec., with installation kit (bolt set, gasket, centering collars, M4 hexagonal wrench), with external cable 5m |
ATZTA TRXUltrasonic Flow Meters For Compressed Air and Nitrogen (Diameters 40A, 50A, 65A, and 80A)
Features
A cost effective ultrasonic flow meter specialized for measuring air and nitrogen is now available!
It has realized a wide range of measuring ability and ZERO pressure loss using the characteristics of ultrasonic waves. It is also well-equipped to handle dust and mist and has excellent durability compared with conventional flow meters that use other measuring principles because it does not have moving parts.
The meter can be selected from two types of power sources: built-in batteries that can run 10 years without needing power construction, or an external power supply (24 VDC).
・To understand and visualize the usage of compressed air as a measure of saving electric power.. ・To understand the amount of nitrogen refined and used in a factory. (Can be applied to a degreasing treatment.)
Specifications
| Model | External power specifications | TRX40D-C/5P | TRX50D-C/5P | TRX65D-C/5P | TRX80D-C/5P |
|---|---|---|---|---|---|
| Built-in battery specifications | TRX40B-C/5P | TRX50B-C/5P | TRX65B-C/5P | TRX80B-C/5P | |
Diameter (Nominal diameter) |
40A | 50A | 65A | 80A | |
| Power source | External power specifications | 24 VDC ± 10%; Power consumption: 1.1 W or less | |||
| Built-in battery specifications | Lithium battery with a battery life of about 10 years (under an environmental temperature of 20°C) | ||||
| Measurable fluids | Air (mainly the air in a factory) or nitrogen * Please select when ordering. | ||||
| Fluid temperature and humidity | – 10 to 60°C and 90% RH or less | ||||
| Operating pressure | Less than 0 to 1 MPa (Gauge pressure) | ||||
| Flow rate range (Actual flow) | ±1.3～80m3/h | ±2.5～150m3/h | ±4～240m3/h | ±5～300m3/h | |
| Flow measurement accuracy | ±2%RS | ±8～80m3/h | ±15～150m3/h | ±24～240m3/h | ±30～300m3/h |
| ±5%RS | ±1.3～8m3/h | ±2.5～15m3/h | ±4～24m3/h | ±5～30m3/h | |
| Low flow rate cut-off | ±0.2m3/h | ±0.4m3/h | ±0.5m3/h | ±0.8m3/h | |
| Normal conversion accuracy | ± 2.5% (at 500 kPa and 25°C) | ||||
| Display (Switched by buttons) | Model | LCD 7 segments (with unit and alarm displays) | |||
| Main display *2 | [Forward flow display mode] Accumulated flow rate: 00000000.0 (Nm3/h) in 9 digits Trip accumulated flow rate: 0000000.0 (Nm3/h) in 8 digits Instantaneous flow rate: 00000.00 (NL/min) in 7 digits | ||||
| [Forward and reverse flow display mode] Forward accumulated flow rate: 00000000.0 (Nm3/h) in 9 digits Reverse accumulated flow rate: -0000000.0 (Nm3/h) in 8 digits Instantaneous flow rate: 00000.00 (NL/min) in 7 digits | |||||
Sub display |
Instantaneous flow rate: 000.00 (Nm 3/h, less than 200 Nm3/h) in 5 digits 0000.0 (Nm 3/h, 200 Nm3/h or more and less than 2000 Nm3/h) in 4 and 1/2 digits 00000 (Nm 3/h, 2000 Nm3/h or more) in 5 digits [200 A × 10] | ||||
| Pressure: 0000.0 kPa in 5 digits Temperature: 00.0°C in 3 digits | |||||
| Output | Current output | 4 to 20 mA (± 0.5% FS); Load resistance: 400 Ω or less; Upper output current: 22 mA Select output from instantaneous flow rate, pressure, and temperature by pressing a button. A separate power supply (24 VDC ± 10%) is necessary if you use the meter of the built-in battery specifications. *1 | |||
| Output range (4 to 20 mA): Instantaneous flow rate 0 to ☐☐☐☐ Nm3/h (Forward flow display mode) – ☐☐☐☐ to ☐☐☐☐ Nm3/h (Forward and reverse flow display mode) ☐☐☐☐ are the values set by the button. | |||||
| Pressure: 0 to 1000 kPa Temperature: -10 to 60°C | |||||
| Contact output | Two Open-drain output systems Maximum load: 24 VDC, 10 mA Maximum frequency: 10 Hz Duty: 35% to 65% | ||||
| Output 1: Unit pulse (Forward flow) Output 2: Unit pulse (Reverse flow) Flow rate upper and lower limits alarm Selection of telegram output | |||||
| Pulse output units: 100 NL/P or 1000 NL/P | |||||
| Connection method | Wafers (Fixed by JIS 10 K flanges) | ||||
| Mounting position | Horizontal (LCD display to be placed upward), or vertical mounting | ||||
| The materials exposed to gases | Aluminum alloy, PPS, fluorosilicone rubber, etc. | ||||
| Mass | External power specifications | 1.0kg | 1.2kg | 1.4kg | 1.7kg |
| Built-in battery specifications | 1.1kg | 1.3kg | 1.6kg | 1.8kg | |
| Installation location | Indoor and outdoor (The safety class IP64 qualified) | ||||
| Storage temperature | -20 to 70°C; No condensing | ||||
| Regulatory compliance | CE marking compliant (EN 61000- 6-2:2005 and EN 61000- 6-4: 2007) | ||||
*1: In the actual flow measurement setting, the digits of the accumulated flow rate display, instantaneous flow rate display and pulse output vary. *2: When displaying the instantaneous flow (NL /min), the main display (accumulated flow rate), sub-display (instantaneous flow rate [Nm3/h]), pressure (kPa) and temperature (°C) will not be displayed. * Piping conditions: 20D or higher in upstream and 5D or higher in downstream for the 25A/32A models. (When using in the forward and reverse display mode, 20D or higher on both sides.) 10D or higher in upstream and 5D or higher in downstream for the 40A or larger models. (When using in the forward and reverse display mode, 10D or higher on both sides.) For more information, please contact our sales and branch offices.
Conversion chart between actual and normal flow rates
| Conversion conditions | 40A | 50A | 65A | 80A | |||||
|---|---|---|---|---|---|---|---|---|---|
| Temperature (°C) | Gauge pressure (MPa) | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum |
| Actual flow rate (m3/h) | 1.3 | 80 | 2.5 | 150 | 4 | 240 | 5 | 300 | |
| 20 | 0.7(Nm3/h) | 9.6 | 590 | 18 | 1100 | 30 | 1770 | 37 | 2210 |
| 30 | 0.5(Nm3/h) | 7.0 | 430 | 13 | 800 | 21 | 1280 | 27 | 1600 |
| 0.7(Nm3/h) | 9.3 | 570 | 18 | 1070 | 29 | 1710 | 36 | 2140 | |
Dimensions
(Unit: mm)
| Model | W | D | H | Mass |
|---|---|---|---|---|
| TRX40 | 76 | 81 | 163 | 1.1 kg (1. Built-in lithium battery model) 1.0 kg (2. External power supply model) |
| TRX50 | 90 | 96 | 176 | 1.3 kg (1. Built-in lithium battery model) 1.2 kg (2. External power supply model) |
| TRX65 | 108 | 117 | 197 | 1.5 kg (1. Built-in lithium battery model) 1.4 kg (2. External power supply model) |
| TRX80 | 117 | 126 | 220 | 1.8 kg (1. Built-in lithium battery model) 1.7 kg (2. External power supply model) |
Ultrasonic Flow Meter For Air TRX50D-C/5P Aichi Tokei Denki Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
=> Xem thêm sản phẩm của PitesCo tại đây
Hãy là người đầu tiên nhận xét “Ultrasonic Flow Meter For Air TRX50D-C/5P Aichi Tokei Denki Vietnam”
Sản phẩm tương tự
Aichi Tokei Denki Vietnam
TBZ150-9.9-N Aichi tokei việt nam – Pitesco đại lý Aichi tokei giá tốt nhất
Aichi Tokei Denki Vietnam
Aichi Tokei Denki Vietnam
Đồng hồ đo lưu lương khí siêu âm UX/ UZ Aichi Tokei Denki TBZ300 9.9-L
Aichi Tokei Denki Vietnam
TBZ300-3.5-N Aichi Tokei Việt Nam – Pitesco đại lý chính thức Aichi Tokei
Aichi Tokei Denki Vietnam
TBX150F Aichi Tokei Denki VietNam – Pitesco đại lý Aichi Tokei Denki
Aichi Tokei Denki Vietnam
Aichi Tokei Denki việt nam đo lưu lượng khí gas TBX100 Aichi Tokei Denki
Đánh giá
Chưa có đánh giá nào.