LABTHINK INTERNATIONAL VIỆT NAM – PITESCO ĐẠI LÝ MÁY ĐO LABTHINK VIỆT NAM
C612M Digital Torque Tester
C612M Digital Torque Tester is the first generation of automatic torque tester with manipulator,
which is one professional testing instrument that can be used to measure the application torque and removal torque of the caps of bottles, spout bags and flexible tube packages.
NJY-20 Digital Torque Tester
NJY-20 Digital Torque Tester can be used to measure the open force and lock force of the caps of bottles, suction and flexible tube packages.
The open and lock forces of bottle caps are important online and offline technical parameters of production.
C631H Thermal Shrinkage Tester
C631H Thermal Shrinkage Tester is designed and developed in accordance with ISO 14616 and GB/T 34848, for determination of shrinking force, contracting force and shrinkage ratio of heatshrinkable films. Shrinking force greater than 0.01N can be detected.
RSY-R2 Film Free Shrink Tester
RSY-R2 Film Free Shrink Tester is designed for the heat shrinkage test and size stability test of films, heat shrinkable pipelines, medical PVC sheets, back sheets and other materials in liquid medium at various temperatures.
C660M Leak and Seal Strength Tester
C660M Leak and Seal Strength Tester is professionally applicable to quantitative determination of seal strength, seal quality, burst pressure, seal integrity, compression resistance, torsion force and joint/disengaging force of various flexible packages, aseptic packages, plastic tamper-evident closures, flexible tubes, caps and other materials.
C660B Leak and Seal Strength Tester
C660B Leak and Seal Strength Tester is professionally designed for the leakage tests of packages for food, drugs, medical instruments, household chemical products, cars, electronic components, stationeries and other industrial products.
C650B Headspace Gas Analyzer
C650B Headspace Gas Analyzer is featured with handheld design and equipped with high precision sensors and air pump supplied by globally well-known manufacturers. It can provide accurate and fast evaluation of the volume of oxygen and carbon dioxide (with optional CO2 sensor) in sealed packages, bottles and cans, et
C650M Headspace Gas Analyzer
C650M Headspace Gas Analyzer is featured with handheld design and equipped with high precision sensors and air pump supplied by globally well-known manufacturers. It can provide accurate and fast evaluation of the volume of oxygen and carbon dioxide (with optional CO2 sensor) in sealed packages, bottles and cans, etc.
C650H Headspace Gas Analyzer
C650H Headspace Gas Analyzer is ofprofessional structure design and is with high-precision sensor, the O2 Contentin sealed bags, bottles, cans and other hollow packaging containers can beaccurately and conveniently determined. Meanwhile, with the selection of testaccessories, CO2 can also be tested.
C611M Box Compression Tester
C611M Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks, paper tanks, paper cases, IBC tanks and other packages.
C680M Tearing Tester
C680M Tearing Tester is suitable for testing tear resistance of film, sheet, soft PVC, PVDC,water-proof roll, woven material, polyolefin, polyester, paper, paperboard,textile and non-woven fabric, etc.
C681M Flex Durability Tester
C681M Flex Durability Tester is professionally applicable to the determination of flex durability of flexible films, composite films and coating films.
CZY-8SA Lasting Adhesive Tester
CZY-8SA Lasting Adhesive Tester can be used to test the holding power of pressure-sensitive tapes, pressure-sensitive labels and protective films, etc.
RT-01 Rub Tester
RT-01 is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument conforms to ASTM D5264 & TAPPI T830.
FT-F1 Fogging Tester
FT-F1 is professionally applicable to the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, e.g. plastic articles, polyurethane, textiles, leather, adhesives, non-woven and thermal forming elastomers at high temperature conditions
TQD-G1 is professionally applicable to the determination of air permeability of decorating materials used in cars, e.g. polyurethane, expanded plastics, PVC, leather, textiles, non-woven and other materials.
ERT-01 Evaporation Residue Constant Weight Tester is professionally designed for the precisely quantitative determination of dissolved substances of table wares, containers, packaging films, cans, tubes and other food-use equipments in different soaking solutions.
C301B Water Vapor Transmission Rate Test System is designed and manufactured based on infrared sensor method and conforms to the requirements of ASTM F1249 and ISO 15106-2.
C306H WaterVapor Transmission Rate Test System is designed and manufactured based on infrared sensormethod and conforms to the requirements of ASTM F1249 and ISO 15106-2.
C303H Water Vapor Transmission Rate Test System is based on the testingprinciple of infrared water vapor sensor, it is designed and manufacturedaccording to ASTM F1249, ISO 15106-2 and other standards to provide highprecision and high efficiency water vapor transmission test for high and mediumgas barrier materials.
403H Oxygen/Water Vapor Transmission Rate Test System
C403H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2.
C406H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is Equipped with 6 tes cells and designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2.
C360 Water Vapor Transmission Rate Test System, is designed and manufactured based on the gravimetric determination method and conforms to the requirements of ASTM E96.
C360 Water Vapor Transmission Rate Test System, is designed and manufactured based on the gravimetric determination method and conforms to the requirements of ASTM E96.
C390 Water Vapor Transmission Rate Test System, is designed and manufactured based on infrared sensor method and conforms to the requirements of ISO 15106-2 and ASTM F1249.
Water Vapor Transmission Rate Test System, is designed and manufactured based on the electrolytic sensor method and conforms to the requirements of ISO 15106-3.
W3/062 is based on cup method to measure water vapor transmission rate of plastic films, foils and finished packages. It has Six independent testing cells and can be easily connected with 9 satellite systems.
W3/031 is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes and the testing process is completely automatic and conforms to international standards.
C101B Gas Permeability Test System
C101B GasPermeability Test System is based on the differential pressure method,and is professionally applicable to the determination of gas transmission rate ofplastic films, composite films, high barrier materials, sheets, and metal foilsat different temperatures.
C106H GasPermeability Test System is based on the differential pressure method,and is professionally applicable to the determination of gas transmission rate,solubility coefficient, diffusion coefficient and permeability coefficient ofplastic films, composite films, high barrier materials, sheets, and metal foilsat different temperatures.
C130H Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate, solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheets, and metal foils at different temperatures.
VAC-V2 can be used to measure gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, high barrier material, sheets, foils, etc.
BTY-B3P Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas permeability of battery diaphragms, breathable films and other relative polymer products.
C201B Oxygen Transmission Rate Test System is designed and manufactured based on the coulometric sensor method andconforms to ASTM D3985.
C206H Oxygen Transmission Rate Test System is designed and manufactured based on the coulometricsensor method and conforms to ASTM D3985.
C203H Oxygen TransmissionRate Test System is based on Coulometric oxygen analysis sensor andequal pressure test metod, and is conforming to ASTM D 3985 and otherstandards. It provides high-precision and high-efficiency oxygen permeabilitytests for high and medium gas barrier materials.
LABTHINK INTERNATIONAL VIỆT NAM – Pitesco đại lý máy đo Labthink
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
=> Xem thêm sản phẩm của PitesCo tại đây
Hãy là người đầu tiên nhận xét “LABTHINK INTERNATIONAL VIỆT NAM – PITESCO ĐẠI LÝ MÁY ĐO LABTHINK VIỆT NAM”
Sản phẩm tương tự
Labthink international Việt Nam
LAPTHINK VIỆT NAM – PITESCO ĐẠI LÝ PHÂN PHỐI LAPTHINK TẠI VIỆT NAM
Labthink international Việt Nam
C660M Labthink – Leak and Seal Strength Teste Labthink international Việt Nam
Đánh giá
Chưa có đánh giá nào.